KCLUG

6 participants
3293 discussions

RE: routing problem - fork on gateways
by Jeremy Fowler 31 Aug '05

31 Aug '05

> Most people don't have the code necessary to combine a > cablemodem with a > firewall... I don't understand what your saying here...

1 0

RE: routing problem - fork on gateways
by Jeremy Fowler 31 Aug '05

31 Aug '05

> Internet - cablemodem - 10.1.1.1 firewall > 10.1.1.2 router / squid / dhcp / email > all internal here > > by your convention, maybe .2 should become .254 > > everything is a linux box in the net > So your router and firewall are two separate machines? Seems redundant to me, most firewalls do routing as well. The only reason you would need a router is if the firewall wasn't on the same subnet. 10.1.1.1/24 10.1.1.2/24 (Internet) --- [ firewall ] --- [ router ] | | |---[ host1 ]---| 10.1.1.30/24 You can see here that you can get to the internet by going thru the router, but because the router and the firewall are on the same subnet, you can just go directly to the firewall. You just add an extra hop that is not needed and just eats up network and computer resources. If the firewall was on a different subnet, then you would need a router: 10.1.0.1/24 eth0: 10.1.0.254/24 (Internet) --- [ firewall ]-------------[ router ]-----------[ host1 ] eth1: 10.1.1.254/24 10.1.1.30 Here, host1 needs the router to reach the 10.1.0.0/24 subnet.

3 2

RE: routing problem
by Kelsay, Brian - Kansas City, MO 31 Aug '05

31 Aug '05

If you ever have to do this in Winders 2000 or XP, do "ipconfig /flushdns". It can be helpful. Entia non sunt multiplicanda praeter necessitatem. ---Occam -----Original Message----- From: kclug-bounces(a)kclug.org On Behalf Of Charles Steinkuehler Quite possible...I find: ip neigh flush dev eth0 helps a lot with this, especially when playing with proxy-arp settings! - -- Charles Steinkuehler charles(a)steinkuehler.net

1 0

RE: routing problem
by Jeremy Fowler 31 Aug '05

31 Aug '05

Default gateway for host1 is set to 10.1.1.2, change to 10.1.1.1 -----Original Message----- From: kclug-bounces(a)kclug.org [mailto:[email protected]]On Behalf Of hanasaki Sent: Wednesday, August 31, 2005 11:04 AM To: List - KCLUG Subject: routing problem host1 host2 and host3 are all connected to the same 10/100 switch. traceroute host3 <= from host1 hits host2, the router The goal is to skip the router and go directly to host3 since they are on the same subnet. thoughts? whats the issue? and fix? Thanks, ============= host1 = addr:10.1.1.30 / mask 255.255.255.0 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.1.1.2 0.0.0.0 UG 0 0 0 eth0 =============== host2 = addr:10.1.1.2 <= the router to the outside world Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth0 ================ host3 = 101.1.1.10 / mask 255.255.255.0 _______________________________________________ Kclug mailing list Kclug(a)kclug.org http://kclug.org/mailman/listinfo/kclug

4 4

RE: routing problem
by Jeremy Fowler 31 Aug '05

31 Aug '05

> On 11:34:52 am 08/31/05 "Jeremy Fowler" <JFowler(a)westrope.com> wrote: > > Default gateway for host1 is set to 10.1.1.2, change to 10.1.1.1 > > Umm.. no. The default gateway is for any request outside the > local subnet > and if 10.1.1.2 is the router out then this is correct. The > routing table > for host1 shows that no gateway is required for 10.1.1.0/24 > and that all > else (0.0.0.0) should be shoved out 10.1.1.2. Umm.. host1 and host2 are on the same subnet, so why would they have two separate default gateways? The reason its going thru host2 is because 101.1.1.10 isn't on the subnet and so it forwards packets to host2, the default gateway. He doesn't want packets to go thru host2, so you change the default gateway. Standard convention places gateways on either the first or last address on the subnet range, in the case of 10.1.1.0/24 that would be either 10.1.1.1 or 10.1.1.254. So when I saw that a) the default gateway wasn't the same for host1 and host2 it caught my eye. and b) host two had a default gateway address at the beginning of the subnet address range, so I assumed it was correct. Try not to be so condescending with your replies, makes you sound like an ass.

2 1

RE: routing problem
by Jeremy Fowler 31 Aug '05

31 Aug '05

Is this correct? host3 = 101.1.1.10 or should it be: host3 = 10.1.1.10 -----Original Message----- From: kclug-bounces(a)kclug.org [mailto:[email protected]]On Behalf Of hanasaki Sent: Wednesday, August 31, 2005 11:04 AM To: List - KCLUG Subject: routing problem host1 host2 and host3 are all connected to the same 10/100 switch. traceroute host3 <= from host1 hits host2, the router The goal is to skip the router and go directly to host3 since they are on the same subnet. thoughts? whats the issue? and fix? Thanks, ============= host1 = addr:10.1.1.30 / mask 255.255.255.0 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.1.1.2 0.0.0.0 UG 0 0 0 eth0 =============== host2 = addr:10.1.1.2 <= the router to the outside world Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth0 ================ host3 = 101.1.1.10 / mask 255.255.255.0 _______________________________________________ Kclug mailing list Kclug(a)kclug.org http://kclug.org/mailman/listinfo/kclug

1 0

routing problem
by hanasaki 31 Aug '05

31 Aug '05

host1 host2 and host3 are all connected to the same 10/100 switch. traceroute host3 <= from host1 hits host2, the router The goal is to skip the router and go directly to host3 since they are on the same subnet. thoughts? whats the issue? and fix? Thanks, ============= host1 = addr:10.1.1.30 / mask 255.255.255.0 Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.1.1.2 0.0.0.0 UG 0 0 0 eth0 =============== host2 = addr:10.1.1.2 <= the router to the outside world Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth0 ================ host3 = 101.1.1.10 / mask 255.255.255.0

1 0

Opera ad-free reg key today only
by Kelsay, Brian - Kansas City, MO 30 Aug '05

30 Aug '05

I'd assume that the reg key could be used with any OS version of Opera, but YMMV. For one day only, you can get an ad-free version of Opera. From Download.com, (and for one day only, valid from 12 a.m. Tuesday, August 30 to 12 a.m. Wednesday, August 31 2005 (PDT)). Simply e-mail registerme(a)opera.com to obtain a registration code Normally $39USD.

4 4

OT: Moving IE Cookies
by Patrick M 30 Aug '05

30 Aug '05

Hi, I know its off topic, but perhaps someone knows. I have a site that is customized and remembers me based on my cookies. I am wanting to move them to another machine. If I can put them on Firefox all the better if not I can put it in an IE folder. I tried putting the cooking in the IE cookies folder changed the username to the username of the account and rest of the cookies then left the rest the same, but no luck. Is there somewhere you have to register the cookie? Is there a way to find out what cookies a site is using (I thought it was just the one with the host.com of the site)? user(a)host.com [2] Thanks Patrick -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.10.16/83 - Release Date: 8/26/2005

2 1

OT: IBM SCSI Drive
by Paul Taylor 29 Aug '05

29 Aug '05

Anyone have a IC35L036UWD210-0 laying around? It's a 36.7 GB IBM Ultra 160 Wide 68-pin SCSI drive. Someone I know had a drive fail and they need the data off the drive. I was interested in a) buying the drive or b) swapping the circuit board to see if I can get the data off drive and then giving your circuit board back. I'll pay you for the trouble for swapping whether it works or not. Please respond to me personally and provide a contact # if I can contact you. Regards, Paul

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG